Setting The Time - iHome iWBT5 Instruction Manual

SETTING THE TIME:

TIME SYNC & MANUAL TIME SETTING
DST SWITCH
This unit has a Daylight Saving Time (DST) Switch on the bottom of the unit. By
default, the switch is set to Auto and will automatically adjust the time at the
start and end of Daylight Saving Time. To adjust this manually, move the switch
to -1 to subtract an hour or to +1 to add an hour.
S ett in g th e t ime manually
1. Press and release the Time Set Button. "CLOCK SET" will appear on the display
and the time will flash. Press the + or – Buttons to set the correct time (hold
for rapid adjustment). Make sure to set the correct AM or PM time.
(The PM/AM indicators appear to the left of the time display.)
NOTE: The display can be set to standard 12 hour time (AM and PM) or to 24
hour time. To toggle between 12 and 24 modes, press and release the
Alarm 1 or Alarm 2 Button located on top of the unit at any time while display
is flashing during manual time setting mode.
2. Press and release the Time Set Button to confirm the current time setting.
The YEAR will flash on the display. Press the + or – Buttons to set the
correct year.
3. Press and release the Time Set Button to confirm the current year setting.
The DATE will flash on the display. Press the + or – Buttons to set the correct
month and day (hold for rapid adjustment).
4. Press and release the Time Set Button to confirm the current date setting.
Two beeps will sound to indicate time setting mode is complete.
5