Time Sync & Manual Time Setting; Setting The Time Manually - iHome iPL22 User Manual

SETTING THE TIME:
TIME SYNC & MANUAL
TIME SETTING
TIME SYNC
This unit is equipped with auto sync. By default, the unit will sync to the
time on your iPhone or newer iPod whenever you dock it in the Lightning
dock. When successful, the updated time will appear on the display. If
sync is unsuccessful, try to sync again using a di erent iPhone or iPod. If
sync still doesn't work, set the time manually (see below).

SETTING THE TIME MANUALLY

1. Press and hold the Time Set Button until "MAN" or "SYNC" flashes in the
display with one beep. If "SYNC" is displayed, press the + or – Buttons so
"MAN" appears in the display, indicating manual time setting mode.
2. Press and release the Time Set Button. The time will flash in the display.
3. Press the + or – Buttons to set the correct time (hold for rapid adjustment.
Make sure you are setting the time to the correct AM or PM time. The PM
indicator appears at the upper left of the display; there is no AM indicator.
NOTE: The time can be set to standard 12 hour time (AM and PM) or to 24
hour time (sometimes called "military time"). To toggle between 12 and 24
modes, press and release the
any time when the display is flashing during manual time setting mode.
4. Press and release the Time Set Button to confirm the current time setting
(two beeps will sound) and exit time setting mode.
Alarm Button located on top of the unit at
5