Setting The Time - iHome iBT234 User Manual

SETTING THE TIME:

DST SWITCH
There is a Daylight Saving Time (DST) Switch on the back of the unit. By default,
the switch is set to Auto and will automatically adjust the time at the start and
end of Daylight Saving Time. To adjust this manually, move the switch to -1 to
subtract an hour or to +1 to add an hour.
Setting th e t ime
1. Press and hold the Time Set Button. The time will flash on the display. Press
the + or – Buttons to set the correct time (hold for rapid adjustment). Make
sure to set the correct AM or PM time.
(The PM indicator appears on the left of the display. There is no AM indicator.)
NOTE: The display can be set to standard 12 hour time (AM and PM) or to 24
hour time. To toggle between 12 and 24 modes, press and release the
Alarm 1 or Alarm 2 Button located on top of the unit at any time while display
is flashing during manual time setting mode.
2. Press and release the Time Set Button to confirm the current time setting.
The YEAR will flash on the display. Press the + or – Buttons to set the
correct year.
3. Press and release the Time Set Button to confirm the current year setting.
The MONTH will flash on the display. Press the + or – Buttons to set the
correct month (hold for rapid adjustment).
4. Press and release the Time Set Button to confirm the current month setting.
The DATE will flash on the display. Press the + or – Buttons to set the correct
date (hold for rapid adjustment).
5. Press and release the Time Set Button to confirm the current date setting.
Two beeps will sound to indicate time setting mode is complete.
5