Table of Contents
Advertisement
2.
Loosen the screws on the terminal strip.
3.
Insert the wires coming from the door openers into holes and tighten the screws.
Note
• The KX-TD1232 is illustrated as the main unit.
• For wiring, UL 1015, AWG 22 twisted wire or the equivalent is recommended.
• The wire should be between 1.2 mm and 2.4 mm in diameter including the coating.
D=1.2 mm 2.4 mm
General Installation
2.4 Installation of Optional Cards and Unit
To door
opener 2
To door
opener 1
89
Advertisement
Table of Contents
