Panasonic KX-TD1232NL Installation Manual page 151

KX-TD1232 with the KX-TD146
Up to two Cell Station Interface Units (KX-TD146) can be connected to any of the three
expansion areas. Up to six Cell Stations (KX-TD142) can be connected to the KX-TD146.
Expansion
area 3
Expansion
area 2
Expansion
area 1
Note
• System Programming is required for expansion unit location.
<SYS PRG [109]>
Default : Area 1 = 4-CO Line Unit
• An AC adapter (KX-A277) is necessary.
• KX-TD146 and KX-TD142 can only be installed to the Master system.
• For unit combinations, refer to Section 1.4.2 Expansion Unit Combination.
DECT Installation
Expansion Unit
Connectors
Remove the front
cover plate(s).
Areas 2 and 3 = 8-Station Line Unit
KX-TD146
CS INF
D1232
AC Adaptor (KX-A277)
5.2 Wireless System Installation
KX-TD142
DECT
DECT
DECT
DECT
DECT
DECT
151