Table of Contents
Advertisement
3.2.2 Installing the Unit
Step 6 is different for each unit.
The ISDN unit should not be installed only to the Slave system.
The main unit in the illustrations is the KX-TD1232.
1.
Loosen two screws on the cover plate. Insert fingers into the slits to remove the cover plate.
Slit
Note
Any of the cover plates can be removed, as needed.
2.
Connect the cabinet cord to the connector in the main unit firmly.
ISDN Installation
Slit
3.2 ISDN Line Connection
119
Advertisement
Table of Contents
