Table of Contents
Advertisement
4.2 E & M (TIE) Line Installation
4.2 E & M (TIE) Line Installation
4.2.1 Location of the Unit
Precautions
KX-TD816
One E & M (TIE) Line Unit (KX-TD184) can be installed to either of the two expansion areas
on the KX-TD816.
Expansion
area 2
Expansion
area 1
Note
• System Programming is required for expansion unit location.
<SYS PRG [109]>
Default : Area 1 = 4-CO Line Unit
• For unit combinations, refer to Section 1.4.2 Expansion Unit Combination.
130
To protect the printed circuit boards (P-boards) from static electricity, do not
touch parts on the P-boards in the main unit and on the optional unit.
Expansion Unit
Connectors
Area 2 = 8-Station Line Unit
4 E&M
D816
Remove the front
cover plate(s).
E & M Installation
Advertisement
Table of Contents
