Table of Contents
Advertisement
Note
• If two expansion units are installed, cut the cabinet cover(s) on the lower cabinet(s) to allow
the cords from upper cabinet to go down through the cabinet cover(s). To protect the cords,
smooth the cut edges.
Amphenol 57JE Type (screw-attach-type 50-pin connector) Connection for KX-TD170
To fix the Amphenol 57JE type (screw-attach type 50-pin connector) to the 8-Station Line Unit,
follow the procedure below.
1.
The 50-pin connector (Jack) on the Expansion Unit has two hook-pins. Remove the upper
hook-pin, and take out the screw.
50-pin
connector
Note
When installing a connector like the type shown below, unscrew the lower hook-pin also.
Then drive both accessory screws.
General Installation
Cut here
Screw
Hook-pins
2.4 Installation of Optional Cards and Unit
77
Advertisement
Table of Contents
