Selecting The Display Language - Panasonic KX-TD1232NL Installation Manual

5.2.4 Selecting the Display Language

The default setting of the PS displaying language is "AUTO (English)". If Dutch display is
required, follow the procedure below.
1.
Press
Display: KEY
2.
Press
• You can also search by pressing
Display: PROGRAMMING
3.
Press
Display: PS-PROGRAM
4.
Press
Display: BACKLIGHT
5.
Press
Selection appears.
Display: LANGUAGE
6.
Press
• You can also search by pressing
Display example: LANGUAGE
7.
Press
Display example: GEHEUGEN SLOT
8.
To exit the PS Programming mode, press
Note
• Moreover, you can select French, Italian, Spanish or German display.
• If you are going to assign the PS to the Digital Super Hybrid System while the default
setting is still "AUTO", the displaying language will depend on the setting of the system.
• During the site survey, only English display is supported regardless of the setting.
DECT Installation
(Function).
(Book) 2 times.
(OK).
OK
OK (OK).
= ON
(Next) or (Previous) repeatedly until the display for the Language
= AUTO
(Book) until the desired selection is displayed.
= DUTCH
OK (OK).
= UIT
(Next) or (Previous).
(Next) or (Previous).
C
(Cancel).
5.2 Wireless System Installation
159