ZyXEL Communications Omni TA128 User Manual page 45

• If you are logging on to a Microsoft Windows network,
select "NetBEUI."
• If you are logging on to a Novell network, then select
"IPX/SPX Compatible."
• If you are logging on to an Internet connection, then select
"TCP/IP."
7. Click on "TCP/IP Settings."
If your host requires you to specify an IP address (Static IP), then
click on the "Specify an IP address" radio button and enter your
IP address. Otherwise, leave the "Server assigned IP address"
checked. Most servers assign an IP to you when you log in.
Click the "Specify name server address" radio button and enter
your primary and secondary DNS (Domain Name Server) IP.
Obtain the DNS numbers from your ISP. In most cases, you
should leave "Use IP header compression" and "Use default
gateway on remote network" checked. When all of the selections
have been made, click "OK."
8. This completes the remote connection definition. Locate the new
connection icon in your "Dial-up Networking" folder, and double
click on it.
33