ZyXEL Communications Omni TA128 User Manual page 135

Command Options Function & Description
*G1
*G2
*G3
*G4
*G5
*GCn n=0-1
*GC0 * Disable call-back function
*GC1
*HCn n=0-4
*Hn n=0-39 Modify user password table at
*HS
*In n=0-1
*I0 *
*I1
*Mn n=0-1
*M0 *
*M1
*T
*V
Enable type 1 security, with password
check (ZyXEL to ZyXEL only).
Enable type 1 security, with password
check and call back (ZyXEL to
ZyXEL only).
Enable type 2 security, with password
check.
Enable type 2 security, with password
check and call back.
Enable type 2 security, with password
check and call back, remote site enters
the call back number.
Call-back function selection.
Enable call-back function
Assign call-back phone number, "s" to
storage location, "n"
location n.
Modify supervisory password
(Default: "ZyXEL")
Command set selection.
AT command set.
V.25bis command set.
Leased line auto-handshake mode
selection.
Leased line auto-handshake on
Originate mode.
Leased line auto-handshake on
Answer mode.
Recall the last CND (Caller ID)
information.
View the Password table
Ref.
S17b6-
7
S17b6-
7
123