Mounting Raid Sets To Storage Server - Seneca XVAULT xNVR200 Hardware User's Manual

C. MOUNTiNG a raid seT TO THe xNVr
windows 7 and windows server 2008 r2
after a RaID set is created and initialized it must then be mounted to the storage server operating system. this entails four operations;
• Selection of partition style (MBR or GUID Partition GPt)
• Creation of disk type—Simple Disk is the default
• assignment of Drive letter
• Quick format of disk
1. Click on start button
2. Click on administrative Tools
3. Click on Computer Management
4. Click on disk Management
5. Select partition type MBR or GPt.
Choice Help:
a. If partition is larger than 2tB than select GPT
b. If partition is to be used as a boot partition for iSCSI, it must be smaller than 2tB and have a MBR partition style.
NOTe: In this example, GPT style will be selected
xVault xNVR200/300/400 User Guide V2.0.0 30