Bad Drive Rebuild/Restore - Seneca XVAULT xNVR200 Hardware User's Manual

C. BiOs LeVeL Bad driVe reBUiLd/resTOre
1. Enter the Management Menu via Ctrl and M as described earlier in this manual.
2. Select Rebuild. Identify the defective drive. If the
bad drive is installed in an internal fixed posi-
tion as is the case with the 4 bay, 8 bay, and 12
bay configurations, power down the system and
replace the defective drive, power up and return
to this screen display. If the OS drive is hot swap
removable, then replace the defective drive.
3. Select the defective drive position and hit space.
Press F10. When prompted select Y to start the
rebuild/restore to the replacement drive. after the
rebuild is complete, press any key to continue.
xVault xNVR200/300/400 User Guide V2.0.0 24