Changing Camera/Viewing/Management Port Ip Addresses - Seneca XVAULT xNVR200 Hardware User's Manual

d. CHaNGiNG CaMera/ViewiNG/MaNaGeMeNT POrT iP addresses
Port attributes are accessed as follows;
Click on start button located on the bottom left corner of the display.
1. Click on Control Panel
2. Click on Network and internet
3. Click on Network and sharing Center
4. Click on Change adaptor settings
5. Select the Camera or View_Mgmt port to be reviewed or
changed
6. Select internet Protocol Version 4 (TCP/ipv4)
7. Review or change IP information for the selected
port.
NOTe: Each Port must have a unique IP address and the
same mask. Setting or features must be set the same for
each port.
xVault xNVR200/300/400 User Guide V2.0.0
1
3
6
5
2
4
7
16