Getting Started; Drive Enclosure Slots And Trays; Drive Tray Identification - Seneca XVAULT xNVR200 Hardware User's Manual

Table of Contents

Advertisement

V. GeTTiNG sTarTed
a. drive enclosure slots and Trays
Operating System (OS) drives are not front side hot swap accessible. 2U enclosures have the operating system disk mounted internally.
3U and 4U drives are rear mounted and hot swappable. the operating system drive may or may not come as a mirrored pair, this is
dependent on standard configuration and option availability.
Removable drives are installed beginning with SlOt 1 and continuing sequentially until all drive bays are filled. Drives installed from the
factory will be in groups of performance. Meaning, Solid State Drives will be installed first, followed by 15k RPM drives, followed by 10k
RPM drives then 7200 RPM drives. Future addition of drives does not require reordering drives; it is advised that additional drives be
added in order of performance. SSD and 7200 RPM drives are available with Sata interfaces, never mix SaS and Sata drives in the
same RaID set or group.
xNVr 2U 4 BaY
sLOT-1
sLOT-2
xNVr 2U 8 BaY
sLOT-5
sLOT-6
sLOT-1
sLOT-2
xNVr 2U 12 BaY
sLOT-9
sLOT-10
sLOT-5
sLOT-6
sLOT-1
sLOT-2
i. driVe TraY ideNTiFiCaTiON
all drive trays shipped from the factory will have a slot number ID affixed to the top front. trays will be labeled whether drives
are installed or not.
xVault xNVR200/300/400 User Guide V2.0.0
sLOT-3
sLOT-4
sLOT-7
sLOT-8
sLOT-3
sLOT-4
sLOT-11
sLOT-12
sLOT-7
sLOT-8
sLOT-3
sLOT-4
xNVr 3U 16 BaY
sLOT-13
sLOT-14
sLOT-9
sLOT-10
sLOT-5
sLOT-6
sLOT-1
sLOT-2
xNVr 4U 24 BaY
sLOT-21
sLOT-22
sLOT-17
sLOT-18
sLOT-13
sLOT-14
sLOT-9
sLOT-10
sLOT-5
sLOT-6
sLOT-1
sLOT-2
sLOT-15
sLOT-16
sLOT-11
sLOT-12
sLOT-7
sLOT-8
sLOT-3
sLOT-4
sLOT-23
sLOT-24
sLOT-19
sLOT-20
sLOT-15
sLOT-16
sLOT-11
sLOT-12
sLOT-7
sLOT-8
sLOT-3
sLOT-4
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xvault xnvr300Xvault xnvr400

Table of Contents