e. CHaNGiNG isCsi/Nas POrT aTTriBUTes
For iSCSI implementation it is highly recommend to leave the iSCSI ports at the factory shipped static IP port addresses.
NIC port attributes are accessed as follows;
Click on start button located on bottom left corner of display.
1. Click on Control Panel
2. Click on Network and internet
3. Click on Network and sharing Center
4. Click on Change adaptor settings
5. Select the isCsi/Nas port to be reviewed or changed
6. Select internet Protocol Version 4 (TCP/ipv4)
7. Review or change IP information for the selected
port.
xVault xNVR200/300/400 User Guide V2.0.0
1
3
6
2
4
5
7
17