Creating A Mirrored Os Drive Pair - Seneca XVAULT xNVR200 Hardware User's Manual

When the following screen appears, the BIOS RaID
control has successfully been entered.
NOTe: dO NOT select Ctrl and H, this is not the OS
drive RaID control screen. Major damage to existing
video can occur.
B. CreaTiNG a MirrOred Os driVe Pair
reMeMBer the system ships from Seneca with the operating system installed. this section is only provided in the event recovery
from a catastrophic event that destroyed the entire mirrored disk pair is required.
1. From the management screen select
Configure and easy Configuration
2. From the arraY seLeCTiON MeNU use
the up and down arrows to select the two
drives for the mirror set. Use the space key to
lock the desired drives.
xVault xNVR200/300/400 User Guide V2.0.0 20