Pantech Jest User Manual page 53

• Phone Only: Allows you to edit the lock code for Security. (The default lock code is the
last 4 digits of your phone number.)
• Calls & Services: Allows you to edit the lock code for Restrictions. (The default lock code
is the last 4 digits of your phone number.)
5. If Phone Only is selected, enter the new four-digit code in the
Code field. Enter the new four-digit code again in the
field to confirm your input, then press the OK Key [SET].
6. If Calls & Services is selected, enter the current lock code in the
Current Code field. Enter the new four-digit code in the
field. Enter the new four-digit code again in the
then press the OK Key [SET].
RESTRICTIONS
Use the following procedure to configure Location Setting, Calls and Messages
restrictions.
1. Slide the phone up, press the
7. Phone Settings, 7. Security.
2. Enter the four-digit lock code. The default lock code is the last 4 digits of your
phone number.
3. Press 2. Restrictions.
4. Enter the four-digit lock code again.
5. Select one of the following settings:
• Location Setting: Unlock Setting/Lock Setting.
• Calls: Incoming Calls/Outgoing Calls.
For Incoming Calls, set Allow
For Outgoing Calls, set Allow
• Messages: Incoming Messages/Outgoing Messages.
For Incoming Messages, set Allow All
For Outgoing Messages, set Allow All
6. Press the OK Key [SET].
102
Enter New
Re-enter New Code
Enter
Enter New Code
Re-enter New Code
[MENU], then press 9. Settings &
All, Contacts Only or Block All.
All, Contacts Only or Block All.
or Block All.
or Block All.
PHONE LOCK SETTING
This setting specifies whether the phone should be locked whenever it is turned on.
Lock Mode prevents the unauthorized use of your phone. Once the phone is locked,
it is in restricted mode until the lock code is entered. You can still make emergency
calls.
1. Slide the phone up, press the
7. Phone
2. Enter the four-digit lock code. The default lock code is the last 4 digits of your
phone number.
field,
3. Press 3. Phone Lock
4. Select one of the following settings, then press the OK Key [SET].
• Unlocked:
• On Power Up:
LOCK PHONE NOW
Tools,
Lock the phone now.
1. Slide the phone up, press the
7. Phone
2. Enter the four-digit lock code. The default lock code is the last 4 digits of your
phone number.
3. Press 4. Lock Phone
4. To unlock the phone from idle mode, then touch the Right Soft Key
[Unlock] and enter the four-digit lock code.
RESTORE PHONE
To delete all User Data and restore all settings to their initial defaults:
1. Slide the phone up, press the
7. Phone
2. Enter the four-digit lock code.
3. Press 5. Restore
[MENU], then press
Settings, 7. Security.
Setting.
Phone is unlocked.
Phone will lock when it is turned on.
[MENU], then press
Settings, 7. Security.
Now.
[MENU], then press
Settings, 7. Security.
Phone.
01
02
9. Settings & Tools,
03
04
05
06
07
9. Settings & Tools,
9. Settings & Tools,
103