Install Battery; Remove Battery - Pantech Jest User Manual

Hide thumbs Also See for Jest:
Table of Contents

Advertisement

Unread EMS
Read EMS
New/Unread Message
Opened/Read Message
Message Delivered
Incomplete Delivery
Sent Message, Delivery
Failed
Message Locked
Text Message Draft
Picture Message Draft
Priority
Unopened MMS
Notification
Opened MMS Notification
IM Screen Name
Address
WL Messenger
16
Message Icons
Corrupt Message
Pending Message Send
Unread MMS
Read MMS
Sent Message
Received Message
Unread WAP Push
Read WAP Push
Multiple Message
Delivered
Multiple Message Failed
Multiple Message
Incomplete
Multiple Message Pending
Multiple Message Sent
Other Icon
AIM
Yahoo!
DST (Daylight Saving Time)

INSTALL BATTERY

1. Insert your finger tip into the slot (1), then push down on
top of the battery cover and slide it off to remove (2).
2. Slide the battery into the slot (3) by aligning the contacts
and press down (4) until you hear the "click".
Correct
Incorrect
3. Align the cover tabs with the slots on the back of the
device and slide the battery cover onto the unit until it
snaps into place.
If the battery is not correctly placed in the compartment,
the handset will not turn on and/or the battery may detach
during use.
Correct

REMOVE BATTERY

1. To remove the battery cover, insert your finger tip into
the slot (1), then push down on top of the battery cover
and slide it off (2).
Incorrect
01
02
03
04
05
06
07
17

Advertisement

Table of Contents
loading

Table of Contents