How To Connect The 4X1 Dvikvm Switcher - Gefen 4x1 DVIKVM Switcher series User Manual

HOW TO CONNECT THE 4x1 DVIKVM Switcher

Connect your computers DVI, USB, and audio to the 4x1 DVIKVM Switcher inputs
1
using the supplied cables.
Connect your DVI display to the DVI output of the 4x1 DVIKVM Switcher.
2
Connect your USB and audio devices to the USB and audio outputs.
3
Connect the RMT-4 remote control (if applicable).
4
Connect the External IR Extender to the RJ-45 port (if applicable).
5
Plug the 5VDC power supply into the 4x1 DVIKVM Switcher.
6
Your computers must be turned on one at a time and the switcher must be selected
to the computer that is booting up. After one computer completes the startup process,
you can boot up the second computer and repeat the process with the remaining
computers.
4