Table of Contents
Advertisement
(2) Another 2 screws used to attach the right side
shelf (B) are already screwed into the cart right
panel. Loosen the 2 screws that are pre-placed
onto cart right panel (Hint: Do not remove these
2 screws completely.)
Remove one 5/32-in.x 10mm screw which has
been pre-placed on the control panel.
(3) Bring side shelf to right side panel and carefully
align screw holes. Attach using one 5/32-in. x
10mm screw, as show in Fig. 5, and there ¼-in. x
12mm truss head screws as shown in Fig. 5 & 6.
Fully tighten screws on both side shelves.
B
8
Fig. 4
A
Fig. 5
Fig. 6
Hide quick links:
Advertisement
Table of Contents
