Download  Print this page

Advertisement

Chapter 2

Loading photo paper

Use the photo paper tray which has been
cover, to print on Photo (10  15 cm) or Photo
assembled on the top of the output paper tray
L (89  127 mm) size paper. When you use
the photo paper tray, you do not have to
remove the paper from the tray beneath it.
(For the maximum number of photo cards you
can load, see Paper weight, thickness and
capacity on page 30.)
a
Squeeze the blue photo paper tray
release button (1) using your right index
finger and thumb and push the photo
paper tray forward until it locks into the
photo printing position (2).
1
2
Photo Paper Tray
24
b
Press and slide the paper width
2
guides (1) and paper length guide (2) to
fit the paper size.
c
Put the photo paper into the photo paper
tray and gently adjust the paper width
guides to the paper.
Make sure the paper width guides touch
the sides of the paper.
Check that the paper is flat in the tray.
NOTE
• Always make sure that the paper is not
curled or wrinkled.
• The Photo indicator confirms that the
photo paper tray is in the Photo printing
position. The A4/LTR indicator confirms
that the photo paper tray is in the Normal
printing position.
2
1

Advertisement

Table of Contents

This manual is also suitable for:

Mfc-j870dw

Comments to this Manuals

Symbols: 0
Latest comments:
  • Max Jun 12, 2018 11:07:
    density of black--
    Ho​w do I dark black so when irs forms are printed the big large areas are printed fully"​;