Loading photo paper
Use the photo paper tray which has been
assembled on the top of the output paper tray
cover, to print on Photo (10 15 cm) and
Photo L (89 127 mm) size paper. When you
use the photo paper tray, you do not have to
take out the paper that is in the tray beneath
it. (For the maximum number of photo cards
you can load, see Paper weight, thickness
and capacity uu page 26.)
Squeeze the blue photo paper tray
release button (1) using your right index
finger and thumb and push the photo
paper tray forward until it clicks into the
photo printing position (2).
Press and slide the paper side
guides (1) and paper length guide (2) to
fit the paper size.
Put the photo paper into the photo paper
tray and gently adjust the paper side
guides to the paper.
Make sure the paper side guides touch
the sides of the paper.
Check that the paper is flat in the tray.