Datalogic DS8100A Reference Manual page 64

7
The following image shows a system consisting of five readers where the external signals
(trigger, encoder, serial to host, etc.) are connected to the master through the CBX100.
The system is powered by the PWR-240 where:

the master is connected through CAB-86xx, which also provides bus termination

the last slave is connected through CAB-83xx, which also provides bus return.

the master and all slaves are connected together through the CAB-81xx cables
CAB-81xx
Slave 2
CAB-81xx
* P.S. (Presence Sensor) connected to Input 1 (External Trigger/PS) input.
** CBX100 jumper set to accept scanner power.
*** Encoder connected to Input 2 (Encoder) input.
Figure 69 – Small Synchronized Network with more than 2 Readers and Single Power Unit
50
CAB-81xx CAB-83xx
Slave 4
Slave 3
Slave 1
CAB-81xx
DS8100A REFERENCE MANUAL
Master
CBX100**
CAB-F0x
PWR-240
CAB-86xx
P.S.*
Encoder***
Local Host