Datalogic DS8100A Reference Manual page 108

11
Problem
Communication:
the scanner "Network" LED is not lit.
How do I obtain my units' serial
numbers?
94
TROUBLESHOOTING GUIDE
Suggestion
 If the LED is OFF, check the connections
between the DS8100A slaves and the SC6000
or DS8100A master. If the error persists,
contact your Datalogic distributor.
 The device serial number is printed on a label
that is affixed above the connector panel of
the reader.
 The serial number is also displayed when
connecting the device through the Genius™
program.

Serial numbers consist of 9 characters: one
letter, 2 numbers, another letter followed by 5
numbers.
DS8100A REFERENCE MANUAL