Smoke hollow Deluxe Outdoor Grill & Smoker 8500 Assembly And Operation Instructions Manual page 9

Assembly
Step 3
Fig. 3
Step 4
Fig. 4
Step 5
Fig.5
Step 6
Fig. 5
Step 3: Attach Bottom Shelf Assembly
Locate: Bottom Shelf and (8) M6x15 bolts.
Procedure:
Refer to Fig. 3 and attach the Bottom Shelf to
the Legs as shown using (2) M6x15 bolt in
each leg.
NOTE: Make sure the side of the bottom
shelf with the cylinder opening is
facing the gas grill side.
FULLY TIGHTEN ALL BOLTS USED IN
STEPS 1, 2 AND 3.
Step 4: Retaining Support Assembly
Locate: Retaining Support and (2) M6x15
bolts.
Procedure:
Attach retaining support using (2) M6x15 bolts
as figure 4.
Step 5: Caster Wheel Assembly
Locate: 4 Caster Wheels
Procedure:
Insert the threaded end of the caster wheel
into the bottom of each leg as shown in Figure
4 and fully tighten with the wrench provided in
the hardware pack.
Lock all (4) Caster wheels so they cannot
turn.
Step 6: Check your Progress
Stand the grill up onto its caster wheels and it
should look like the image in Figure 5.
9