Table of Contents
Advertisement
Mounting the Scanner
User Interface
The User Interface connection (J2) provides the integrator a means to
monitor scan engine status (LEDs), and offers an additional mechanism
for manually triggering the device.
The user connection (J2) uses a Molex part number, 0527460671,
0.50mm (.020") Pitch FFC/FPC Connector, Right Angle, SMT, ZIF,
Bottom Contact Style, 6 Circuits, Gold Contact Plating. For custom ad-
aptations, the integrator must interface using an FFC (Flat Flexible Cable)
that mates properly to scan engine ZIF connector.
Figure 6. Top view
Pin 1
J3
Pin 1
J2
The assignment of the J2 connector pins are indicated in the following ta-
ble.
10
Gryphon™ GFE4400
Advertisement
Table of Contents
