Table of Contents
Advertisement
4
4.5.8 Modify Settings | Global Settings | Diagnostics
Use the Diagnostics window to configure the digital inputs and outputs for your barcode
scanning system.
o edit the Diagnostics settings:
T
1. In the tree menu under Modify Settings, navigate to Global Settings | Diagnostics.
The Diagnostics window opens.
2. Enter the appropriate information in the form as described below:
Field Name
Action/Definition
Sampling Time Select a Sampling Time in seconds or minutes from the drop-down list. This
selection indicates the time lapse between system diagnostic queries.
Report Slave
Select the check box to report diagnostic information from the slave scanners in the
Scanner
system.
Diagnostics
Errors To
Select the check box next to each error type the system should report.
Report
Select the check box to report PTP (Precision Time Protocol) Time Synchronization
PTP Time
Synchronization
Errors.
Failure
Encoder Failure Select the check box to report encoder (tachometer) errors.
Encoder
Select Disable or a time interval in seconds or minutes from the drop-down list. If a
Timeout
time interval is selected, a stuck encoder will report an error after the selected
interval.
Presence
Select the check box to report presence sensor failure errors.
Sensor Failure
132
DS8110 REFERENCE MANUAL
Advertisement
Table of Contents
