Using Udirect 3 With An Audio Device With Bluetooth - Unitron uDirect 3 User Manual

uDirect 3 is capable of streaming up to 20 hours
with a fully charged battery.
Using uDirect 3 with an audio device
with Bluetooth
If you have an audio source equipped with
Bluetooth functionality (e.g., MP3 player), you
can stream audio wirelessly to your hearing
aids.
Pairing your Bluetooth audio device:
1. uDirect 3 must be switched on and worn
correctly.
2. Press the connect (
buttons at the same time for two seconds
until the audio indicator starts to rapidly
blink blue.
3. Start the pairing process on the Bluetooth
device within one minute according to the
device's user guide and use code "0000" if
prompted.
4. Switch on the other Bluetooth device.
42
) and volume up ( )
5. For some Bluetooth devices it may be
necessary to press "play" on the device.
6. If the devices were paired and connected
correctly, streaming will start automatically
and the audio indicator will turn solid blue.
Playing back audio from your device
1. Begin playback on your device.
2. Adjust the volume level on the device to a
medium to high level.
3. Make minor volume adjustments with the
uDirect 3 volume buttons (
Pausing playback
If you want to temporarily stop streaming to
hear a conversation, press the ( ) button to
pause the streaming. Press the ( ) button
again to resume streaming.
Stopping playback
To stop Bluetooth streaming completely, switch
the other Bluetooth device off or disable its
Bluetooth feature.
).
43