Pairing Your Mobile Phone With Your Hearing Aids - Unitron Stride B-PR User Manual

4) Remove the hearing aids from the charger
Remove the hearing aids from the charging
slots by pulling up and towards the front of the
charger to turn them on.
Do not pull the tubes to remove the hearing aids
from the charger as this can damage the tubes.
18
Pairing your mobile phone with your
hearing aids
1. On your phone, go to your settings menu to
ensure Bluetooth
®
Bluetooth enabled devices.
2. Turn your hearing aids on. Your hearing aids
will remain in pairing mode for 3 minutes.
3. Your phone will show a list of found
Bluetooth enabled devices. Select your
hearing aid from the list to simultaneously
pair both hearing aids. You will hear
a melody when your phone has been
successfully paired to your hearing aids.
It is only necessary to perform the pairing
procedure once with each Bluetooth enabled
phone.
Consult your phone user guide for instructions
on pairing a Bluetooth device with your phone.
Bluetooth is a registered trademark owned by the Bluetooth SIG, Inc.
®
and used under license by Unitron.
is on and to search for
19