Using Udirect 3 With An Audio Device With Bluetooth - Unitron uDirect 3 Manual

Playing back audio from your uMic
1. Clip the uMic to a person, or position it near
a sound source such as a speaker or TV.
2. Adjust the volume level on the uMic to a
medium to high level.
3. Make minor volume adjustments with the
uDirect 3 volume buttons (
Pausing playback
If you want to temporarily stop streaming, press
the ( ) button to pause the streaming. Press
the ( ) button again to resume streaming.
Stopping playback
To stop playback on your device and switch
back to regular hearing programs, press and
hold the access ( ) button for two seconds.
Changing hearing aid programs is not possible
while streaming.
Please contact your hearing healthcare
professional if you can not complete the
pairing procedure with the steps described.
uDirect 3 is capable of streaming up to
20 hours with a fully charged battery.
42
).
Using uDirect 3 with an audio device
with Bluetooth
If you have an audio source equipped with
Bluetooth functionality (e.g., MP3 player), you
can stream audio wirelessly to your hearing
aids.
Pairing your Bluetooth audio device:
1. uDirect 3 must be switched on and worn
correctly.
2. Press the connect (
buttons at the same time for two seconds
until the audio indicator starts to rapidly
blink blue.
3. Start the pairing process on the Bluetooth
device within one minute according to the
device's user guide and use code "0000"
if prompted.
4. Switch on the other Bluetooth device.
5. For some Bluetooth devices it may be
necessary to press "play" on the device.
) and volume up ( )
43