Managing Multiple Audio Inputs To The Udirect 3 - Unitron uDirect 3 User Manual

for 45 seconds, and then every 15 minutes
thereafter.
If there is no FM signal for more than 15
minutes, the notification tone restarts as soon
as the FM signal is detected again.
To deactivate FM completely, unplug the FM
receiver from the uDirect 3.
48
Managing multiple audio inputs to the
uDirect 3
When an audio source
is connected via the
uDirect 3, your hearing
aids will automatically
switch to special
programs.
It is possible to have multiple audio sources
connected and in operation with the uDirect 3:
Two Bluetooth devices (e.g., phone and
•
uTV 3)
One audio input (3.5 mm audio plug)
•
One direct audio input (Europlug)
•
Spoken status indicators and the audio
indicator light inform you about the connected
inputs.
An audio source is considered as "connected"
to the uDirect 3 if:
The audio plug is inserted (with or without
•
audio signal)
Previously-active
hearing program
3.5 mm plug Bluetooth
(audio jack) music 1
FM Bluetooth
Europlug music 2
49