Bluetooth pairing with the uMic
Put uMic into pairing mode:
If the uMic has never been paired before,
pairing mode will be automatically activated
after turning it on.
To manually start pairing mode:
1. Switch the uMic off.
2. Press and hold the volume up
button ( ).
3. Turn the uMic on while still
pushing the ( ) button.
4. Release the ( ) button after
two seconds when the indicator
light rapidly blinks blue.
5. Make sure the streamer and uMic are within
1 m (3 ft) range of each other.
The uMic will remain in pairing mode for two
minutes or until the pairing is completed.
8
Completion of pairing:
Wait until both indicator lights turn solid blue.
This can take up to two minutes but typically is
done within a few seconds.
The uMic can be paired to a maximum of four
devices. A fifth pairing will replace the first paired
device.
Two devices need to be paired only once.
They remain paired after switching off and will
automatically connect after being turned on again.
9