Important Information; Terms Used In This Guide; Specifications - Uniden XDECT 7015WP Series Owner's Manual

Terms Used In This Guide

Accessory An extra handset that can register to and be used with an expandable phone base.
handset All accessory handsets must be registered to a base before you can use them.
The main part of the phone. It connects to your phone line and lets you make and
Base
receive calls. Most bases also have a cradle to store a handset.
(CID on Call Waiting.) A service that shows CID for calls that come in during
CIDCW
another call.
Call
A service that lets you receive calls while you are on another call.
Waiting
Caller ID (Also called CID.) A service that shows the name and number of incoming callers.
Charger A cradle that stores and charges a handset but doesn't connect to the phone line.
The part of the phone that stores a handset. While in a cradle, a handset is always
Cradle
in standby, and any keys are locked.
During a
The handset is currently on a call or has activated a dial tone.
call
Handset A cordless handset that you use to dial the phone and talk to callers.
The phone is inactive: there is no dial tone, no handset is on a call or listening to
In standby
messages.

Specifications

Part number AAD-041S(M)
AC
Input voltage 240V AC, 50 Hz 240V AC, 50Hz
adapter
Output
voltage
Part number BT-694 or BT-694s
Battery
pack Capacity
Do not place the base in direct sunlight or subject it to high temperatures.

22

Important Information

Base Charger
AAD-600S(M)
9V DC @ 9V DC@
350mA 210mA
650mAh (BT-694) or 500mAh(BT-
694s)
Use only the supplied AC

adapters.
Be sure to use the proper

adapter for the base & any
chargers.
Do not place the power cord

where it creates a trip hazard or
where it could become chafed &
create a fire or electrical hazard.