Entering Text On Your Phone - Uniden XDECT 7015WP Series Owner's Manual

Set Line Do not change this setting unless instructed to by customer
Mode service.
This feature adds "0" or "00" at the beginning of the number
Insert 0 received from Caller ID. The default setting for New Zealand is
ON. The default setting for Australia is OFF.

Entering Text on Your Phone

When you want to enter text into your phone (for example, a name
in the phonebook1, use the twelve-key dial pad to enter the letters
printed on the number keys. Here's how it works:
The phone enters the letters in the order they appear on the key.

For example, if you press the number key
enters the letter A. Press
If you press the key again after the last letter, the phone starts the

same letter sequence with small letters. If you press
in a row, the phone enters a (small letter). Press
and six times for c.
If you see the icon

letters first (A B C1, then small letters (a b c1, then the number on
the key (2). The icon [aA] means the phone starts at the small
letters, so it enters small letters first, then the number on the key,
then capital letters.
The phone automatically uses a capital letter for the first letter and

any letter right after a space; all other times, it uses small letters.
If two letters in a row use the same number key, enter the first

letter, then use
position to enter the second letter.
To
Switch between
capital & small letters
Move the cursor
Leave a blank space
Erase one letter
Erase the entire entry
Enter punctuation or a
symbol
10
twice for B, and three times for C.
2
[Aa] in the display, the phone enters capital
CAllEr ID/rIGHT
Follow these steps
Press
/
Press
PHONEBOOK/LEFT
or
CaLLEr ID/rIGHT
Press .
#
Move the cursor to the letter you want to erase and
press
CLEar/INTErCOM
Press & hold
Press to rotate through the available symbols.
0
2
to move the cursor to the next
.
LOCK
to move the cursor to the left
to move the cursor to the right.
.
CLEar/INTErCOM
once, the phone
four times
2
five times for b,
2
.