Table of Contents Product Overview Basic Operations and Display of Functions 2.1 Check of software version and clear 2.2 Code-matching operation 2.3 Basic Setting 2.3.1 Currency symbol setting 2.3.2 Income coefficient setting 2.3.3 CO2 coefficient setting 2.3.4 Date setting 2.3.5 Time setting 2.3.6 Temperature unit setting 2.3.7 Buzzer setting 2.4 Data storage...
Basic Operations and Display of Functions 2.1 Check of software version and clear ShineVision, which consists of a power monitor and a number of transmitters, can achieve 1 to 6 monitoring modes. The transmitters transmit the power data collected from a photovoltaic inverter to the monitor and display the data onto the monitor Insert power supply (or batteries) after pressing “up”...
After the power is energized, the default interface displays, press “down” and “up” keys shortly and select the channel No. (optional from channel No.1 to 6), and press the “down” key for about 3 seconds until the red LED light quickly flash twice , then release it.
after adjustment, then the “6” of 0.163 will flash; press “Up” or “Down” to adjust from 0 to 9, and press “OK” to confirm after adjustment, then the fourth figure “1” its value, ranging from 0 to 9, and press “OK” to confirm after adjustment, then the of the Year “2011”...
2.3.6 Temperature unit setting not be reset until the beginning of the next month or execution of reset. The total generated energy, total generation revenue and total CO2 emissions are always stored and will not be reset until data resetting is performed. When “Temp.”...
2.6 Default interface display There are two modes in the third line, one showing the generated energy, generation revenue and CO2 emissions in the month and the other showing the total generated energy, total generation revenue and total CO2 emissions. Two modes are divided into six interfaces and each interface is displayed after every 5s in cycle, as shown in LCD will automatically refresh its display in the default interface.
The second line shows phase voltage for three-phase AC of each channel. The third line shows two-circuit PV voltage for each channel. If you have some requirements or problems concerning ShineVision, please The fourth line shows time and real-time temperature under the current contact us and provide related information.
Need help?
Do you have a question about the ShineVision and is the answer not in the manual?
Questions and answers