Growatt ShineWiFi-X Configuration Manual

ShineWiFi-X/S
Configuration Guide
For the latest information, please visit https://server.growatt.com.
E service@ginverter.com W www.ginverter.com
For local customer support, please visit
https://www.ginverter.com/support/contact
Step3.
Register an account
1.Connect the phone to a router via a wireless network;
2.Run the Shinephone APP and go to the registration page;
3.Enter the registration information and click Register.
Step6.
Network mode configuration
1.Configure ShineWiFi-X/S in Standard Mode
Standard Mode
Step 01: Connect the phone to the router
Step 02: Go to Settings to configure the network
2.Configure ShineWiFi-X/S in Hotspot mode
Hotspot Mode
Step 01: Press the button on the datalogger to enter the Hotspot Mode
Step 02: Check whether the LED indicator of the datalogger is steady blue
Step 03: Connect the mobile phone to the WiFi which has the same name as the datalogger's SN
Step 04: Go to Settings to configure the local network
Step1.
Turn on the inverter and check the connection status
After installing the ShineWiFi-X/S module, turn on the inverter. If the indicator is
flashing red, it indicates that the communication between the inverter and
ShineWiFi-X/S is normal.
Indication of LED status
LED status
Off Fails to connect to the inverter
Flashing red Successfully connected to the inverter
Flashing green Successfully connected to the inverter and the router
Successfully connected to the inverter, the router and the
Flashing blue
server
Step4.
1.Go to the "Add plant" page;
2.Fill in the plant information;
3.Click Yes to add the plant.
Setup wizard
Setup wizard
Working condition
Step5.
Add a plant
1.Go to the "Add datalogger" page;
2.Scan the serial number or manually enter the serial number and the verification code;
3.Click Yes to add the datalogger.
Connect to the router to configure the network
Select the home router and enter the password
Step2.
Download the ShinePhone APP
Scan the QR code below to download the ShinePhone APP, or
you can search for ShinePhone in the Apple Store or Google
Play to download and install the APP.
1.Make sure you download the latest version.
2.For further information, please visit http://server.growatt.com.
【Android&iOS】
Add a datalogger
Once successfully configured, return to the "My plant" page
Connect to the WiFi which has the same name as the datalogger's SN and configure the
network settings. The default password for the WiFi network is 12345678.
Standerd Mode