Mount The Camera - Bosch MIC550 User Manual

22 en | Mount the Camera
7

Mount the Camera

To mount a MIC Series camera, follow these steps:
Warning!
!
Ensure not to damage the paint on the housing of the camera or the mount.
1. Carefully lift the camera to the mounting location.
2. Connect the female cable connector end (12-pin) of the shielded composite cable to the
male plug in the base of the camera. Screw the cable connector sleeve onto the plug until it is
secured firmly (approximately four (4) turns from the start of thread engagement).
November 2011 | | F.01U.239.454 Operation Manual
MIC Series 550
Bosch Security Systems, Inc.