Bosch MIC550 User Manual page 61

MIC Series 550
Settin
g
Model: MIC550 (standard/non-IR)
Settin
g
There are no other valid combinations. Any other combination can cause the camera to have
problems focusing ("focus issues").An example of an invalid combination is:
–
–
–
This combination of settings causes a blurred view at wide angle. (When zoomed in (at TELE
angle), the view is focused.)
Bosch Security Systems, Inc.
Auto Off Auto
Off Auto Auto
Auto -- On
Night Mode = Auto
IR Illuminator = Auto
IR Focus Correction = Off
RESULTS
IR lamps turn on with Aux
54 or alarms.
Camera enters Night Mode
with Aux 57 or alarms.
When using external IR
lamps, user must control
the IR Focus Correction
using Aux 67 or alarms.
Operation Manual
Common User Commands | en
Notes
Use this for manual
control of the IR lamps.
Use this for manual
control of Night Mode.
For control of IR Focus
Correction with a
MIC-550 camera (non-
IR).
November 2011 | | F.01U.239.454
61