Additional Tools Required - Bosch MIC550 User Manual

MIC Series 550
Quantity Product
1 per camera Power Supply Unit (PSU) for MIC IR cameras
2.3

Additional Tools Required

The following table lists additional tools (not supplied by Bosch) that are or may be required
to install a MIC camera:
Quantity Part
1
1
1
1
1
1
Bosch Security Systems, Inc.
13 mm wrench for the mounting bolts
3 mm screwdriver for the terminal blocks in the MIC PSU
8 mm screwdriver for captive screws for the MIC PSU enclosure
Silicone sealant for ensuring a water tight seal [if not using the Nebar gasket]
Roll of PTFE tape
#2 Phillips screwdriver for adjusting the rain shield, if required
Operation Manual
Part Number
MIC-IR-240PSU-UL,
MIC-IR-115PSU-UL,
MIC-IR-24PSU-UL
November 2011 | | F.01U.239.454
Unpacking | en 13