Camera Setup - Bosch MIC550 User Manual

54 en | On-Screen Display (OSD) Menus (Pelco Protocol)
14.2

Camera Setup

The Pelco Camera Setup Menu provides access to camera settings.
* White Bal:
* Night Mode:
* Wiper
Camera Setup Menu Choices:
Menu
Exit
White
Balance
Night Mode Switches from color to
Wiper
November 2011 | | F.01U.239.454
Camera Setup
Exit...
* = Factory Setting
Focus / Iris: Select
Description
Exits the menu.�
Sets a default value in
case the Pelco
controller disables the
white balance.
monochrome.
OUTDOOR
AUTO
CONTINUOU
S
Sub-menu / Description
OUTDOOR: Sets a default setting if
the controller disables white
balance.
INDOOR: Sets a default setting if
the controller disables white
balance.
ON: Sets Night Mode on.
OFF: Sets Night Mode off.
AUTO: Sets Night Mode to Auto set.
ON/OFF: Activates/deactivates the
selected wiper mode, respectively.
CONTINUOUS: Wiper wipes
continuously until deactivated
manually or by the five-minute time-
out built in to the system.
INTERMITTENT: Wipes twice, then
turns off after 15 seconds.
ONE SHOT: Wipes five times, then
turns off.
WASH WIPE: Wiper washes and
wipes.
Operation Manual
MIC Series 550
Default
Setting
OUTDOOR
ON (Day/Night
models only)
Continuous
Bosch Security Systems, Inc.