Parts List - Camera; Additional Tools - Bosch MIC IP ultra 7100i Installation Manual

14 en | Introduction
2.1

Parts List - Camera

Quantity
1
1
1
1
1
1
1
2.2

Additional Tools

The following table lists additional tools (not supplied by Bosch) that may be required to
install a MIC camera or its accessories:
1 Phillips-head screwdriver to secure the ground lug of the camera
1 Adjustable wrench or socket set to secure the base of the camera to mounting accessories
For canting cameras:
1 Torque wrench with a 5 mm Hex bit to remove/install bolts in the yoke arms
For installing an optional SD card on MIC enhanced models (MIC-7504-Z12xR, MIC-7522-
Z30xR):
a T20 Torx bit
2019-07-03 | 0.17 |
Component
MIC IP ultra 7100i camera
spanner tool [to remove and to attach the yoke caps in order to cant the
camera if desired, and to remove the access plug from the camera head
when installing the optional illuminator accessory (sold separately)]
base gasket
RJ45 coupler
MAC address labels
Quick Installation Guide
Safety instructions
Installation Manual
MIC IP ultra 7100i │ MIC IP starlight 7100i
Bosch Security Systems