1. Manuals
  2. Brands
  3. Plus Manuals
  4. Whiteboard
  5. M-11series
  6. Assembly and setup manual

Plus M-11series Assembly And Setup Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
M-11 Series Copyboard/C-11 Series Captureboard
Assembly and Setup Manual
This is the installation and assembly manual for the M-11 series/C-11 series.
To the Customer
Specialized techniques are required in the wall mounting of the Copyboard. Please do not
attempt any installation work unless you have the techniques.
To the Dealer or Installation Tradesman
In the interest of the safety of the customer, please perform installation work paying due
attention to the strength of the installation location to ensure that it can bear the load of
the Copyboard, printer, and installation parts.
1. Please Read in the Interest of Safety ........................................................ 2
2. Packaging List ............................................................................................. 2
3. Copyboard Installation Procedure ............................................................ 3
4. Assembly of the stand ................................................................................ 3
5. Wall Mounting .............................................................................................. 6
6. Assembly of the Printer Table .................................................................... 9
7. Printer Installation .................................................................................... 11
8. Test Print .................................................................................................... 13
9. Changing the Height of the Unit .............................................................. 14

TABLE OF CONTENTS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M-11series and is the answer not in the manual?

Questions and answers

Related Manuals for Plus M-11series

Summary of Contents for Plus M-11series

  • Page 1: Table Of Contents

    M-11 Series Copyboard/C-11 Series Captureboard Assembly and Setup Manual This is the installation and assembly manual for the M-11 series/C-11 series. To the Customer Specialized techniques are required in the wall mounting of the Copyboard. Please do not attempt any installation work unless you have the techniques. To the Dealer or Installation Tradesman In the interest of the safety of the customer, please perform installation work paying due attention to the strength of the installation location to ensure that it can bear the load of...

  • Page 2: Please Read In The Interest Of Safety

    1. PLEASE READ IN THE INTEREST OF SAFETY Warning • Please be sure to perform the installation and assembly based on this manual. Incorrect installation or assem- bly will be the cause of injury. • Please have 2 or more persons lift the Copyboard when installing or removing it. •...

  • Page 3: Copyboard Installation Procedure

    3. COPYBOARD INSTALLATION PROCEDURE The installation method will change depending on the type of installation. Please perform installation and assem- bly according to the following procedures. G When using the stand Assembly of the stand See Page 3 * The stand may be an option. Assembly of the printer table See Page 9 * The printer may be an option.
  • Page 4 (4) Attach the two horizontal bars to the T-shape legs. Use hexagonal socket screws (M5) and flat washers (M5) to attach. Horizontal bar Partially fasten using the hexagonal wrench (M5), then tighten securely after the upper and lower horizontal bars have been attached. T-shaped leg Hexagonal socket screw (M5) Flat washer (M5)
  • Page 5 (7) Install the stay to the printer table. Insert the nylon bushing into the stay. Stay Nylon bushing Insert the stay into the pipe of the stand. Mount the stay to the printer table using two M3 screws. Notice Check again that the grooves in the stand’s hooks are securely inserted in the mounting holes in the support fittings.

  • Page 6: Wall Mounting

    5. WALL MOUNTING (1) Determining the installation location 1200 mm The diagram indicates the dimensions of the installa- tion positions. The installation position is the same for both the standard type and the wide type. The installation of the Copyboard to the wall is per- formed after the printer table is assembled and at- tached to the Copyboard.
  • Page 7 (2) Stick the cushions on the printer table, then mount the printer table on the main unit. Peel off the protective sheets from the cushions’ adhesive surfaces. Stick the cushions (2) on the back of the bracket. Protective sheet on adhesive surface Cushion Back of bracket...
  • Page 8 (4) Attaching and anchoring the Copyboard to a wall or wall support fitting. (The anchoring method will differ depending on the wall mounting method.) Installing on a Concrete Wall Anchor nut, etc. M6 screw Mounting to a Post M6 wood screw...

  • Page 9: Assembly Of The Printer Table

    6. ASSEMBLY OF THE PRINTER TABLE The printer table can be installed at either the left or right side. The installation method is the same. Printer Table Right-side Installa- Printer Table Left-side Installation tion The method of assembling the printer table is the same for stand placement and for wall mounting. The assembly diagrams omit the stand.
  • Page 10 (3) Securely tighten the screws that were fastened temporarily. (4) Secure the printer with the printer guides. Ink Jet Printers Mount the printer guides to prevent the printer from falling when the Copyboard is moved. Place the printer on the printer table and determine the mounting position of the printer guides.

  • Page 11: Printer Installation

    7. PRINTER INSTALLATION The locations of the connectors will differ depending on your printer*. Please see your printer manual. An example of a printer installation is described below. * Printer guide diagrams have been omitted. See Page 10 for printer guide installation. (1) Use the USB cable supplied with this unit to connect the printer connector of this unit with the USB connector of the printer.
  • Page 12 • Using the Cable Clip Fasten the power cable and the USB cable with the supplied cable clips. .Remove the backing paper from .Raise the band of the clip, dis- .After finishing the cable the rear surface of the clip and engage it from the hook, and pull wiring, pass the band end affix the clip at the desired loca-...

  • Page 13: Test Print

    8. TEST PRINT Remove the printer cartridge installation seals and the protective sheet used for shipping before using the printer for the first time. Please see your printer manual for details. (1) Press the ON/Standby button of the Copyboard and switch on the power. (2) Switch on the printer power.

  • Page 14: Changing The Height Of The Unit

    9. CHANGING THE HEIGHT OF THE UNIT This is the height adjustment to the stand* at the time of setup. The height can be changed among 3 levels in 100 mm units (1770, 1870, and 1970 mm (the maximum height)). Please lock the casters by pressing the lower portion of the lock buttons of them.
  • Page 15 © 2006, PLUS Vision Corp. 14-3603-06D...

This manual is also suitable for:

C-11 series

Table of Contents