Cisco ASR 5000 Series Installation And Administration Manual page 71

Configuring the L-ESS Server
Parameter
maxinfotimestampdiff
ServerIpAddress
ServerPort
OL-22979-03
Description
L-ESS uses this configurable to test whether L-ESS on
startup is referring to old information about missing files.
The configured value indicates the maximum allowed
difference between the current time stamp and the timestamp
at which information for identifying missing files was
written.
If the difference exceeds, L-ESS will assume fresh restart
and will restart identifying missing files ignoring previous
information.
Minimum value allowed is 30 minutes and maximum
allowed is 1440 minutes (24 hours). Default is 60 minutes.
This specifies the IP address that is used by L-ESS to create
TCP socket. In case of stand alone installation this should be
the machine's IP address and in case of cluster based
installation this should be Logical Host's IP address. Default
is current machine's IP address.
This port is used when creating TCP sockets to avoid
starting of similar L-ESS instances on same L-ESS machine.
The default value for this parameter is 22222. The limit is
within 1025 to 65535.
Important:
it is absolutely required.
Cisco ASR 5000 Series External Storage Server Installation and Administration Guide ▄
Do not change this port unless
L-ESS Server Configuration ▀
Default Value
60
N/A
22222
71