▀ Configuring Storage Array
Step 17
Click Close.
Step 18
Double-click the server in the main dialog. Refer to the following figure for details.
Step 19
Double-click the array in the main dialog. Refer to the following figure for details.
Step 20
Select the array, and click Standard Configure on the Configuration menu.
Step 21
Enter the password for the ssconfig user that you selected earlier.
Step 22
Select RAID 5, then select Use a standby drive, and Write a new label to the new LD check boxes.
▄ Cisco ASR 5000 Series External Storage Server Installation and Administration Guide
26
Veritas Cluster Installation and Management
OL-22979-03