Cisco ASR 5000 Series Installation And Administration Manual page 48

▀ Installing L-ESS Application in Stand-alone Mode
Parameter Description
Primary Configuration
LESS Type the directory path where you want the L-ESS to be installed. The default is
Installation the current directory.
Directory
IP Address for Type the IP address of the local machine where the L-ESS application is
LESS installation installed.
Base Directory Type the base directory path for the fetched data.
Path for Fetched
Data
Log Directory Type the directory path for the log files.
Path
SMTP Configuration
SMTP Server If you want Process Monitor (PSMON) alert messages automatically e-mailed to
Name a specific person, type the host name or IP address of a valid SMTP server. Press
ENTER for no SMTP server and e-mail recipient.
Email-ID [To ] Type the e-mail address of the person who should receive the alert messages.
Miscellaneous Configuration
▄ Cisco ASR 5000 Series External Storage Server Installation and Administration Guide
48
Important:
This IP address will be used to lock a socket to
avoid starting of similar L-ESS instances. In case of stand alone
installation this should be machine's IP address and in case of cluster
based installation this should be Logical Host's IP address. Default is
current machine's IP address.
L-ESS Installation and Configuration
Default Value
Current directory from
where the L-ESS
installation script is
executed.
IP address of the local
machine where L-ESS is
installed
<less_install_dir>/ess/fet
ched_data
Stand-alone mode:
<less_install_dir>/ess/lo
g
Cluster mode: When the
L-ESS installation is in
shared path, the log files
will be available at
<shared_path>/LESS/log
.
When the L-ESS
installation is in local
path and the data files are
on shared path, the log
files will be available at
<shared_path>/LESS/les
slog_hostname.
Null
Null
OL-22979-03