Cisco ASR 5000 Series Installation And Administration Manual page 62

▀ Installing L-ESS Application in Cluster Mode
Parameter Description
Add SNMP host
Type (Y)es to add another SNMP Manager host.
Remove SNMP
Type (Y)es to remove the currently configured SNMP Manager host.
host
Log level This value specifies the severity of log messages. The values can be one of the following:
SNMP Host Configuration
SNMP host name Type the hostname or IP address where the SNMP Manager resides.
SNMP port Type the SNMP Manager port number.
SNMP community Type the community string that should be used while sending the SNMP traps.
string
Remote Host Configuration
Host Name or IP To establish an SFTP connection, type the hostname or IP address of the chassis.
Address of Starent
Platform
SFTP User Name Type the user name used to log on to chassis.
▄ Cisco ASR 5000 Series External Storage Server Installation and Administration Guide
62
Important:
The maximum number of SNMP Manager hosts that are
allowed to be configured is four.
Important:
The default values for all the parameters except SNMP
Manager Host Name will be taken from previous host configuration for the new
host.

0 - Disable all logs

1 - Debug Level logs

2 - Info Level logs

3 - Warning Level logs

4 - Error Level logs

5 - Critical Level logs
Important:
This parameter is applicable only if the source or destination is
at remote location.
Important:
This parameter is applicable only if the source or destination is
at remote location.
L-ESS Installation and Configuration
Default
Value
No
No
4
Null
162
public
Null
Null
OL-22979-03