Table of Contents
Advertisement
Chapter 4
Using the LMD9014
4.1 Status Display of the Screen
Input
Signal
format
Safe Marker
Audio Meters
Speakers
OSD Tally
1. LED Tally Light: This tri-color (red/green/amber) light is controlled through a
DB9 connector on the rear panel. For more information about the DB9
connector, refer to "Rear Panel" on Chapter 4.4.
2. Input Signal Format: It displays the input signal format and can be set in the MAIN
Menu.
3. Safe Areas: Multiple safe areas are configurable in the
4. Audio Meters: Levels for the audio. For LMD9014-SC and LMD9014-V, only two
meters on the left side.
5. UMD: The MAIN Menu provides settings to customize the
text area to show a line of characters, numbers, and/or some symbols.
6. Speakers: Audio may be selected for monitoring through the left and right speakers.
7. Time Code: The de-embedded time code from the HD/SD-SDI source displays in the
top right corner.
Waveform and Vectorscope: The signal waveform and vectorscope are configurable
8.
in the
MAIN Menu
—4—
LMD9014 LCD MONITOR
LED Tally Light
OSD Tally
.
User Manual
Waveform
Vectorscope
UMD
Time Code
.
MAIN Menu
(In-Monitor Display)
UMD
or
Advertisement
Table of Contents
