Configuring Vlan Settings For Cisco Wap351 - Cisco WAP131 Administration Manual

LAN
VLAN Configuration
STEP 3
STEP 1
STEP 2
Cisco WAP131 and WAP351 Administration Guide
By default, all traffic on the WAP device uses VLAN 1, the default untagged
VLAN. This means that all traffic is untagged until you disable the untagged
VLAN, change the untagged traffic VLAN ID, or change the VLAN ID for a VAP
or client using RADIUS.
• Untagged VLAN ID—Specifies a number between 1 and 4094 for the
untagged VLAN ID. The default is 1. Traffic on the VLAN that you specify in
this field is not be tagged with a VLAN ID when forwarded to the network.
VLAN 1 is both the default untagged VLAN and the default management
VLAN. If you want to segregate management traffic from the untagged VLAN
traffic, configure the new VLAN ID at your router, and then use this new VLAN
ID on your WAP device.
• Management VLAN ID—The VLAN associated with the IP address that you
use to access the WAP device. Provide a number between 1 and 4094 for
the management VLAN ID. The default is 1.
This VLAN is also the default untagged VLAN. If you already have a
management VLAN configured on your network with a different VLAN ID, you
must change the VLAN ID of the management VLAN on the WAP device.
Click Save. The changes are saved to the Startup Configuration.

Configuring VLAN Settings for Cisco WAP351

To configure the settings for a VLAN:
Select LAN > VLAN Configuration.
In the VLAN Setting Table, each VLAN record includes the following fields:
• VLAN ID—Indentifier of the VLAN. Each VLAN ID is ranged from 1 to 4094
and should be different with others VLAN ID.
• Description—Description of the related VLAN. The length should be fewer
than 64 characters that are composed of A-Z, a-z, 0-9, _.
• Management VLAN—Management VLAN is the VLAN used to access the
WAP device through Telnet or the web GUI. There must be one and only one
VLAN as the management VLAN. If no interface (wire or wireless) belongs to
the management VLAN, there will be no interface that a user can use to
access the configuration utility.
4
68