Cisco WAP131 Administration Manual page 184

Single Point Setup
Wireless Neighborhood
Cisco WAP131 and WAP351 Administration Guide
To see all devices detected on a given Single Point Setup, navigate to the web-
based interface of a member and select Wireless > Rogue AP Detection.
For each neighbor access point, the following information is displayed:
• Display Neighboring APs—Choose one of the following radio buttons to
change the view:
- In cluster—Only display the neighbor WAP devices that are members of
the cluster.
- Not in cluster—Only display the neighbor WAP devices that are not
cluster members.
- Both—Displays all neighbor WAP devices, including cluster members
and nonmembers.
• Cluster—The list at the top of the table shows IP addresses for all WAP
devices that are clustered together. This list is the same as the members list
on the Single Point Setup > Access Points page.
If there is only one WAP device in the cluster, only a single IP address
column shows, indicating that the WAP device is grouped with itself.
You can click on an IP address to view more details on a particular WAP
device.
• Neighbors—Devices that are neighbors of one or more of the clustered
devices are listed in the left column by SSID (network name).
A device that is detected as neighbor can also be a cluster member itself.
Neighbors who are also cluster members are always shown at the top of the list
with a heavy bar above and include a location indicator.
The colored bars to the right of each WAP device in the Neighbors list shows the
signal strength for each of the neighbor WAP devices, as detected by the cluster
member whose IP address is shown at the top of the column.
The color of the bar indicates the signal strength:
• Dark Blue Bar—A dark blue bar and a high signal strength number (for
example 50) indicates good signal strength detected from the neighbor, as
seen by the device whose IP address is listed above that column.
• Lighter Blue Bar—A lighter blue bar and a lower signal strength number (for
example 20 or lower) indicates medium or weak signal strength from the
neighbor, as seen by the device whose IP address is listed above that
column
11
184